PWRMOVE

Continuous contactless power for systems in motion

PWRMOVE delivers contactless power to moving industrial systems. From electrified monorails and automated storage to sorting and assembly lines, it keeps equipment powered along its route without sliding contacts or trailing cables.

Close-up view of an industrial conveyor system with black crossbelt components and yellow rails, supported by a metallic framework inside a facility.
EXPLORE PWRMOVE

Discover how contactless power keeps industry moving

PWRMOVE delivers continuous contactless power to rail-guided and floor-guided industrial systems, including electrified monorails, sorters, transfer cars (RGVs), automated guided vehicles (AGVs) and automated storage systems. For suitable battery-equipped vehicles, inductive track sections can also support opportunity charging during operation or at designated stops.

Explore how PWRMOVE works in the interactive animation below, including three installation options: rail-guided, in-floor and on-floor.

1996
Pioneering inductive power transfer
300+ km
Industrial track installed
97%
IPS05 power supply efficiency
Up to 60%
Smaller Gen05 system size
Image description
THE PWRMOVE ADVANTAGE

Engineered for continuous industrial operation

PWRMOVE delivers reliable contactless power to moving industrial equipment, even at high speeds. Depending on the application, it supports continuous power transfer or opportunity charging along selected track sections. With no sliding electrical contacts, it reduces wear and maintenance while supporting greater uptime and flexible industrial automation.

Continuous power in motion

PWRMOVE supplies continuous power to moving carriers along the equipped route, including at operating speed. Sorters, monorails and automated transport systems can keep their onboard equipment running without stopping for power. Multiple carriers can share a track when the supply is sized for their combined demand.

Virtually maintenance-free

With no sliding electrical contacts, collector shoes or brushes at the power interface, PWRMOVE minimises mechanical wear and reduces routine servicing. That helps operators maintain availability and lower maintenance requirements.

Reliable in demanding environments

Contactless power transfer avoids exposed sliding electrical contacts at the power interface. Application-specific designs support demanding locations, including dusty production areas, wet environments and suitable underwater installations.

Flexible system design

PWRMOVE supports rail-guided systems and floor-guided routes, with inductive cables integrated into or installed on top of the floor. Track supplies, pickups and regulators can be configured to match the layout, power requirements and operating conditions.

PWRMOVE Gen05 contactless power transfer components
PWRMOVE GEN05

Compact power for next-generation automation

Gen05 represents the latest generation of PWRMOVE technology, operating at 85 kHz with a compact, efficient design for modern industrial automation. Its space-saving architecture supports flexible track layouts and reliable contactless power transfer.

Gen05 is our preferred solution for new installations where its available pickup configurations meet the application requirements.

PWRMOVE Gen05 technical details

The 85 kHz track supply powers the inductive track, while individual pickups and regulators supply onboard loads. Available power per carrier depends on the chosen pickup and regulator configuration.

Diagram of an industrial system setup showing interconnected black control and sensor units mounted on and around a transparent housing containing rollers and two horizontal metal rods.

Gen05 85 kHz components

COMPONENT
KEY SPECIFICATION
DIMENSIONS (W × D × H)
PROTECTION
Black vertical industrial device labeled ENRX with a green panel reading PWRMOVE inductive power supply PS, featuring indicator lights and buttons on the front panel, and an eco & energy friendly sticker.
IPS05 — Inductive Power Supply
20 kW / 85 kHz
332 × 377 × 1029 mm
IP54
Black rectangular electronic device with a U-shaped open slot connected to a black cable ending in a four-pin connector.
EPU05 — E-Pickup 1.5 kW
1.5 kW peak / 1 kW continuous (system)
108 × 185 × 56 mm
IP65
Black and green rectangular electronic device with two multi-pin connectors and a small green indicator light on one end, labeled ENRX PWRMOVE.
IPR05 — Inductive Power Regulator
1.5 kW peak / 1 kW continuous; 48 / 65 V DC
125 × 224 × 59 mm
IP65
Black rectangular electronic device with a green label displaying the text ENRX and PWRMOVE Capacitor Module CMO, featuring two black cable connectors on one side.
CMO05 — Capacitor Module
50 A / 85 kHz; 247.5–313.5 nF
130.1 × 60 × 207.9 mm
IP54
Two long black cables with brown outer wire braiding and a green circular core at their ends.
LZC05 — Litz Cable
10 mm² / 50 A
Ø 7.7 ± 0.5 mm
PUR jacket
Scroll to see the full table
Downloads

Insights and resources

Download brochures and expert materials on our technologies and their industrial applications.

Brochure PWRMOVE EN

Download now

Brochure PWRMOVE DE

Download now

Gen05 85 kHz Technical Datasheets

Download now
PWRMOVE Gen04 inductive power transfer equipment
PWRMOVE GEN04

Proven power for demanding industrial systems

Gen04 delivers continuous contactless power through a proven range of 20 kHz components for rail-guided and floor-guided equipment. Its broad selection of track supplies, pickups and regulators supports new installations with specific requirements not yet covered by Gen05, as well as the long-term operation of existing systems.

Still operating an original Conductix-Wampfler IPT system? The engineering expertise behind these systems continues at ENRX IPT. We can help identify existing components and provide support with spare parts, maintenance, replacements and potential upgrades.

PWRMOVE Gen04 technical details

Explore the available Gen04 track supplies, E-Pickups, Flat Pickups, regulators and system components.

Two electronic power modules side by side, one black rectangular box with warning and product labels and a cable, and a gray finned metal unit with 'IPT' embossed on top and a yellow caution label on its side.

Gen04 rail and floor pickups & regulators

COMPONENT
KEY SPECIFICATION
DIMENSIONS / CONFIGURATION
PROTECTION
Rectangular electronic device with a metallic top plate secured by screws and a yellow warning triangle with a black lightning bolt symbol on its side, indicating electrical hazard, connected to a grey cable.
E-Pickup 750 W
750 W peak / 300 W at 40°C
80 A / 20 kHz
IP68
Black rectangular electrical junction box with metal cover and a yellow warning triangle with a black lightning bolt symbol on the side, connected to a gray cable.
E-Pickup 1.5 kW (Spare parts only)
1.5 kW peak / 600 W at 40°C
80 A / 20 kHz
IP54
Rectangular black electrical device with a metal top plate, yellow high voltage warning symbol, IPT logo, and a white cable extending from one side.
E-Pickup 4 kW
4 kW peak / 1.6 kW at 40°C
125 A / 20 kHz
IP54
Rectangular black electronic device with a large silver heat sink on top and a yellow warning label on the side, featuring a white electrical connector.
Flat Pickup & Rectifier 750 W
750 W peak / 300 W at 40°C
24 / 27 V DC variants
IP54
Rectangular industrial component with a silver top labeled 'IPT' and a black base featuring a yellow warning sticker and connector ports.
Flat Pickup & Rectifier 2.5 kW
2.5 kW peak / 1 kW at 40°C
560 V DC / 20 kHz
IP54
Rectangular metallic electrical enclosure with black cooling fins on top, two black connectors with yellow labels on the side, and a red switch, featuring a yellow caution symbol with a black lightning bolt on the front panel.
Regulator 750 W
750 W peak / 300 W at 40°C
560 V DC / 80 A / 20 kHz
IP54
Rectangular electronic device with a large metal heat sink on top and two multi-pin connectors on the front side.
Regulator 1.5 kW (Spare parts only)
1.5 kW peak / 600 W at 40°C
48–70 V DC / 80 A / 20 kHz
IP54
Rectangular metal electrical box with a warning sign featuring a black lightning bolt inside a yellow triangle on its front panel.
Regulator 4 kW
4 kW peak / 1.6 kW at 40°C
560 V DC + 24 V DC / 125 A / 20 kHz
IP54
Scroll to see the full table
Two industrial electrical power supply units side by side: left is a tall white cabinet with ventilation panels, control buttons, and a lever; right is a smaller dark gray box with ventilation grills and the IPT Technology logo.

Gen04 power supplies

COMPONENT
KEY SPECIFICATION
DIMENSIONS / CONFIGURATION
PROTECTION
Black rectangular industrial electronic device or power supply unit with ventilation slots on top and front panels, secured with screws, mounted on a side bracket.
Track Supply 6 kW
6 kW nominal / 8 kW peak
80 / 125 A; IP20 / IP54 versions
IP20 / IP54
Tall, rectangular industrial electrical control panel with four vented sections, a warning sign with a lightning bolt, and three colored buttons (green, white, red) above two smaller buttons and a large red rotary switch on a black base.
Track Supply 16 kW
16 kW nominal / 22 kW peak
80 / 125 A; IP20 / IP54 versions
IP20 / IP54
Industrial electrical control cabinet with external cooling unit attached on the left side, featuring control buttons, a display screen, and a high voltage warning sign on the front panel.
Track Supply 35 kW
35 kW nominal / 48 kW peak
80 / 125 A; cabinet design
IP20
Scroll to see the full table
Gray electrical junction box with twelve cable glands on top alongside two black insulated electrical cables with copper ends.

Gen04 system components

COMPONENT
KEY SPECIFICATION
DIMENSIONS / CONFIGURATION
PROTECTION
Two long black cables with brown outer wire braiding and a green circular core at their ends.
Litz Cables
20 / 35 mm²
80 / 125 A; 20 kHz
Installation dependent
Rectangular gray electrical capacitor box with two large white cable glands and two small circular connectors on one side, featuring a yellow warning label with a high voltage symbol on the top surface.
Compensation Boxes
80 / 125 A
Adjustable capacitance
IP54
Gray electrical junction box with an open lid showing multiple white cable glands of varying sizes mounted on the top panel.
Junction Boxes
80 / 125 A
Track connection and distribution
IP54
Scroll to see the full table

RELATED APPLICATIONS

Explore relevant applications.

Explore how different systems can be powered and charged, with technical information for each application.

At work every day. For decades

At work every day. For decades

Case study image
Global

Continuous contactless power for 1,100+ AGVs worldwide

1,100+

AGVs powered

10.8+ km

powered routes

58

installations

View case study
Case study image
Disneyland Park, Anaheim, California, USA

Powering Disneyland’s submarines 3 metres underwater

8

submarines powered

450 m

underwater track

15+ yrs

technology in use

View case study
Case study image
Global

Contactless power for airport baggage sorters

25+ yrs

baggage sorting

350 m

powered sorter track

37

sorter carriers

View case study
Case study image
Simpsonville, South Carolina, USA

Continuous contactless power for Caterpillar’s AGVs

20

AGVs powered

200 m

powered route

4 kW

per AGV

View case study
Case study image
Ostrava, Czech Republic

88 skillet platforms powered at Hyundai

88

skillet platforms

4 kW

per platform

2

assembly tracks

View case study

Find the right power system for your application

Every installation has its own requirements for power, movement and integration. Our specialists can help you select the right PWRMOVE configuration.

Discuss your application
View of Earth from space showing the Indian subcontinent, surrounding countries, the Arabian Sea, and the Bay of Bengal with cloud formations and a dark space background.
Portrait of Evandro Nishimuni.

Evandro Nishimuni

General Manager, Business Unit Industrial Mobility
evandro.nishimuni@enrx.com+49 175 785 91 94
Portrait of Andy Haugh.

Andy Haugh

Sales & Business Development Director, North America
andy.haugh@enrx.com+1 843 251 5185

What OEMs want to know about PWRMOVE

Answers on contactless power, track design, pickup selection and system integration.

Discuss your application

Can Gen04 and Gen05 components be combined?

Gen04 operates at 20 kHz and Gen05 at 85 kHz. They are designed as distinct system configurations, so individual components should not be treated as interchangeable. Our engineering team can assess migration, extensions or retrofit requirements for your installation.

What is the difference between E-Pickups and Flat Pickups?

E-Pickups receive power around a rail-guided track. Flat Pickups receive power from inductive cables integrated in or along the floor. The choice depends on mechanical layout and the electrical requirements.

What is the difference between Gen04 and Gen05?

Gen04 operates at 20 kHz and offers a broad selection of track supplies, E-Pickups and Flat Pickups. Gen05 operates at 85 kHz with a more compact architecture. The generations are selected as complete system configurations.

Which power levels are available?

Gen04 track supplies are rated at 6, 16 and 35 kW nominal power. The Gen05 IPS05 is documented at 20 kW. A 40 kW Gen05 option is also referenced in the wider range; contact ENRX IPT for its current availability and configuration. Power available to each moving carrier depends on the pickup and regulator combination.

Can multiple vehicles be powered on one track?

Yes. Multiple consumers can share a powered track. The number and size of consumers depend on the total installed supply capacity, their simultaneous power demand and the track configuration.

Can PWRMOVE be integrated into existing installations?

Suitable existing systems can be assessed for retrofitting. The required modifications depend on track geometry, available installation space, power demand and environmental conditions.

How do I choose the right pickup and regulator?

The right combination depends on whether the equipment is rail-guided or floor-guided, the required continuous and peak power, onboard DC voltage, track layout and operating conditions. Gen04 and Gen05 have different component ranges, so pickups and regulators must be selected as part of a compatible system. ENRX IPT can help OEMs and system integrators specify the configuration for their application.

Can you still support Gen03 and Gen04 systems?

Yes. Gen04 technology remains available, and we continue to support existing Gen03 and Gen04 installations with spare parts and replacement solutions. In many Gen03 systems, older components can be replaced with compatible Gen04 components. Contact us with your system details to discuss the available options.

‍